How to open Foaming Spray BottleUpdated a day ago

Foaming Spray Bottle is built exclusively for use with Koh foaming products.

1. Twist off the head by turning anti-clockwise. If it’s stiff, press down firmly on top as you twist.
2. Fill to the line from your refill pouch. The fill line sits about 1 cm below the shoulder-exactly 300 mL capacity.
3. Prime the pump by pulling the trigger vigorously 2-3 times. Then:
   • ½ pull for a quick burst
   • Full pull for a longer spray
   • Hold & pump for continuous foam (it’ll keep foaming ~1-2 sec after your last pull)

🔥 Hot tip: If the head feels stuck, try one of these temperature tricks:

• Freeze it: Pop the head in the freezer for 5-10 min to contract and loosen the seal.
• Warm it: Run under warm (not hot) water for 60-90 sec to expand and free up any air-seal.

📝 Note: If it still clogs, twist off the head and soak in warm water for 1 min, then pump the trigger 12+ times to flush through.