How do I use Bathroom Squeegee?Updated 9 days ago

Use Bathroom Squeegee for a 10-second daily swipe after showering. Rinse the glass quickly to loosen droplets, place the silicone blade at the top edge at roughly a 40 degree angle, and pull top to bottom in one steady stroke. Overlap slightly until the panel is dry. Wipe the blade on a cloth and hang the squeegee on its hook or wall loop. Daily swipes cut deep-clean time in half by stopping mineral spots before they build up.

For a weekly deep clean, pre-rinse the glass to flush away loose debris. Lather and scrub with Bathroom & Shower Cleaner using Ultra Pro Bathroom Mitt, and let it sit for 60 to 90 seconds. Rinse off the foam thoroughly with warm water. Squeegee dry with firm, even pressure, holding the blade at 30 to 45 degrees and wiping it between passes to avoid streaks. Dab seals and corners dry with Ultra Pro Cloth.

Hold the silicone blade at 30 to 45 degrees against the glass with firm but relaxed pressure. Let the blade flex create the seal rather than pushing hard. Pull top to bottom in one smooth stroke, overlap each pass slightly to avoid missed strips, and wipe the blade edge on a cloth between passes so collected water doesn't drag back onto clean glass.