Koh AU logo
Koh AU logo

All articles

How do I lock my Grout Brush Pole?Updated 4 hours ago

Unlock, adjust length, twist to lock

  1. Extend the pole to your preferred length.
  2. Hold the grey section with one hand and the green section above it with the other.
  3. Twist the two sections in opposite directions (¼-turn is usually enough) until you feel them tighten. You’re screwing an internal thread together, This is the actual “lock”.

The green collar is not the lock

The small green ring under the “lock / unlock” sticker is a spacer, not the mechanism. Spinning it won’t tighten the pole, make sure you’re twisting the pole sections themselves.

Quick check for a secure lock

  • Give the pole a gentle push downwards; if it doesn’t slide, it’s locked.
  • Still slipping? Unscrew, realign the sections, then twist again until snug.

Troubleshooting

Threads feel stripped

Wipe dust or grit off the metal thread, then retry.

Sticker points to green collar

The arrow sticker sits just above the collar to show the direction of twist. Twist the pole, not the collar.

Once the pole is firm, attach your Grout Brush head and scrub awa, no more mid-clean collapses.

Was this article helpful?
Yes
No