How do I reattch Spray Mop Plate?Updated 3 hours ago
TL;DR: If your Spray Mop plate has slipped off the pole, soak the plate in warm (not boiling) water for 2 to 3 minutes, then firmly align and click the pole back into place. If it's cracked, warped, or won't stay on, grab a replacement Spray Mop Plate or start a warranty claim if within 12 months.
Last reviewed: April 2026
Why does the plate fall off Spray Mop?
Plastic components can compress or loosen with knocks, storage pressure, or temperature changes. The warm-water method temporarily relaxes the fit so the pole can seat fully and the locking tabs can engage.
How do I re-fit the plate with the warm-water method?
Warm water bath. Fill a bowl or sink with warm tap water. Comfortable to touch, not boiling.
Soak the plate. Submerge just the mop plate for 2 to 3 minutes.
Click it back. Remove, dry off, and align the pole with the receiver. Press straight down until you feel or hear a click.
Confirm seated. Gentle wiggle. If it still won't lock, repeat once or move to replacement.
⚠ Avoid forcing
Don't force the parts together when cold. That can stress the plastic. A tiny dab of water on the joint can help it slide while seating.
When should I replace Spray Mop Plate?
Is the plate covered by warranty?
⚠ Within 12 months?
Spray Mop comes with a 12-month warranty from purchase date. If the plate is defective inside that window, start a claim. Have these ready before you start.

Direct-swap spare part. Browse all Spray Mop spare parts for other replacements.

Koh Perks
Save more on every order. Members earn points, unlock member-only drops, and stack savings with bundles and freebies.
Join Koh Perks
