How do I use Bottle Bumpers?Updated 14 days ago

TL;DR: Dry bottle ➡️ stretch bumper over the base ➡️ twist until snug ➡️ rinse bumper when needed.

Step-by-step

1. Dry the outside of the bottle. A clean, dry surface helps the bumper grip.
2. Stretch the bumper. Hold the opening with both thumbs and gently widen the opening.
3. Slide over the base. Start at the bottom edge of the Atomiser Spray Bottle or Foaming Spray Bottle and work the bumper up until it sits flush.
4. Twist to adjust. Rotate the bumper so the colour tag faces forward for easy ID.
5. Ready to go. The antimicrobial silicone adds grip, absorbs knocks, and helps you spot the right cleaner at a glance.

Cleaning & care

• Rinse regularly with warm, soapy water; air-dry before refitting.
• Avoid bleach, harsh chemicals or abrasive pads, they can dull the antimicrobial coating.
• Keep away from sharp objects that may nick the silicone.

📝 Tip: If the bumper feels loose, warm it briefly under hot (not boiling) water to restore flexibility, then refit when dry.