How to use: Atomiser Spray BottleUpdated 9 hours ago

Twist off the head by turning anti-clockwise. If it's stiff, press down on the top as you twist.

Fill to the line from your Universal Cleaner pouch or bag-in-box. The fill line sits about 1 cm below the shoulder, exactly 300 mL.

Add 2 to 3 drops of essential oil if you like. Stick to Koh oils and avoid citrus or other brands to keep your warranty intact.

Twist the head back on firmly, then prime the pump by pulling the trigger vigorously 2 to 3 times until it dispenses a steady spray.

Spray as needed. Choose your mode below based on what you're cleaning.

Spray modes

✓  Half-press for a quick spritz on small spots and handprints

✓  Full-press for a longer spray on benchtops and glass

✓  Hold and pump for continuous aerosol-like mist across larger surfaces. It will keep spraying for about 1 to 2 seconds after your final pull.

If it clogs

Twist off the head and soak it in warm water for a few minutes. Reattach and pump the trigger 12 or more times to clear the blockage. This usually resolves it straight away.

If the spray weakens over time, it's often essential oil residue building up in the nozzle. A warm water soak handles this too.