Tips for Ultra Pro Bathroom MittUpdated 16 days ago
TL;DR: If Ultra Pro Bathroom Mitt isn't performing at its best, the fix usually comes down to which side you're using, how much product you're applying, or how the mitt is being washed and stored. Use the fluffy side to lather, the striped side to scrub, and skip bleach, fabric softener, and high-heat dryers.
Last reviewed: April 2026
Why isn't Ultra Pro Bathroom Mitt foaming?
✓ Check these first
Dampen the mitt under warm water before applying product. Use the fluffy lather side (the block colour side) to whip up foam. Make sure you've applied enough Bathroom and Shower Cleaner directly onto the mitt.
⚠ Using the wrong side
The textured striped side is for scrubbing and buffing, not lathering. Starting there won't give you much foam. Flip to the fluffy side to lather, then flip back to scrub.
⚠ Mitt is clogged with old foam
If the mitt has been used heavily without rinsing, the loops can clog with dried product and stop foaming properly. Run it through a wash cycle and air-dry fully before the next use.
Why is Ultra Pro Bathroom Mitt leaving streaks or residue?
✓ Rinse then buff
Rinse the surface fully to wash away loosened scum and cleaner. Finish with the textured striped side to polish. That's what gives you a streak-free shine on tiles and glass.
⚠ Too much product
Overloading with Bathroom and Shower Cleaner can cause streaking. A small amount goes a long way with the mitt's absorbent fibres.
✓ Mitt too wet to dry the surface?
If the mitt is saturated and can't buff dry, finish with an Ultra Pro Cloth for a streak-free dry. The cloth absorbs over 11 times its weight in water and pairs cleanly with the mitt.
Why does Ultra Pro Bathroom Mitt smell or feel sticky?
✓ Rinse, wash, air-dry
Rinse thoroughly after every use to clear all residue. Machine wash on a cool cycle with Sensitive Laundry Liquid, then air-dry completely before storing. Damp storage is the most common cause of odour — hang the mitt somewhere ventilated rather than tucking it into a closed cupboard.
Why are the fibres losing softness?
⚠ Avoid bleach and softener
Chlorine bleach and fabric softeners coat and weaken the microfibre loops over time. Skip both entirely. Dryer sheets do the same and should also be avoided. Iron contact also damages the loops permanently.
✓ Wash separately from lint
Wash the mitt with non-linting items only — no cotton, no towels. Cotton sheds fibres that clog the microfibre loops and reduce scrubbing effectiveness. Wash alone, with other microfibre cloths, or with synthetic items only.
Dual-sided microfibre and scrub mitt with glove-style fit and waterproof lining.
The compatible foaming cleaner for Ultra Pro Bathroom Mitt. Winner of Canstar's Best Bathroom Cleaner.
Koh Perks · earn points
Join 40,000+ Koh Perks members. Earn points on every purchase, refer a friend, redeem on your next order.
Browse all Ultra Pro Bathroom Mitt articles
Chat with ROS-E
ROS-E handles most questions in seconds, 24/7.
Prefer a human? Just ask. If ROS-E can't answer, the rest of our team will step in. We usually reply within 1 to 2 business days.