Why didn't Dishwashing Tablet wrapper didn’t dissolveUpdated 10 hours ago

Dishwashing Tablets are wrapped in a biodegradable PVA film that dissolve during the wash. If you notice bits of film in the filter, try the steps below.

Quick fixes

1. Switch placement: 
   • Standard / auto program: keep the whole tab in the dispenser. 
   • Short / eco program: lay the whole tab flat on the tub floor under the lower spray arm.
     Placing it on the floor lets hot water hit the wrapper sooner.
2. Use a hotter program: 55 - 65 °C cycles give the film more time and heat to dissolve.
3. Check water pressure: Ensure spray arms spin freely and filters are free of debris, good flow helps dissolve tabs fully.

Loading & handling tips

• Handle tabs with dry hands so the wrapper stays intact until wash-time.
• Don’t peel or cut the wrapper. The film is designed to break down safely in water.
• Avoid stacking large items in front of the dispenser door; the tab must drop freely when the flap opens.

The PVA film is septic-safe and will not block drains once fully dissolved.